Analogue Electronices
Paper, Order, or Assignment Requirements
Cover page Table of Contents 1.Introduction In this Chapter, you may give a brief introduction of the common emitter amplifir, and, especially, the aim and objectives of the assignment. 2.Practical Measurement 2.1 Experimental Circuit 2.2 Experimental Equipment and Components 2.3 Experimental Procedure 2.4 Experimental Results 2.4.1 DC Conditions of Single Amplifier 2.4.2 Midband Gain of Single Amplifier 2.4.3 Frequency Response of Single Amplifier with Single Cc 2.4.4 Frequency Response of Single Amplifier with Double Cc 2.4.5 DC Conditions of Cascaded Amplifier (Note: If you have done the optional part) 2.4.6 Frequency Response of Cascaded Amplifier (Note: If you have done the optional part) 3. Theoretical Analysis 3.1 DC Conditions of Single Amplifier 3.2 Midband Gain of Single Amplifier 3.3 High Cut‐off Frequency of Single Amplifier 3.3.1 Cut‐off Frequency with Single Cc 3.3.2 Cut‐off Frequency with Double Cc 3.3.3 Cut‐off Frequencies with Cc=705pF, Cc=470pF/2 and Cc=0 3.4 DC Conditions of Cascaded Amplifier 3.5 Midband Gain of Cascaded Amplifier 4. PSPICE Simulation 4.1 DC Conditions of Single Amplifier 4.2 Midband Gain of Single Amplifier 4.3 Frequency Response of Single Amplifier With Single Cc 4.4 Frequency Response of Single Amplifier With Double Cc 4.5 Frequency Response of Single Amplifier With Cc=705pF, Cc=470pF/2 and Cc=0 4.6 DC Conditions of Cascaded Amplifier 4.7 Frequency Response of Cascaded Amplifier 5. Results Analysis 6. Conclusion References Appendixes ***************************please the writer should follow the all Structure which I uploaded in assignment sheet and he should follow the same steps in sample lab3 I will uploaded with the files. also I uploaded files includes: drawing for the electrical circuits should use in the report and hand calculation which should the write review it and add in the lab report for the part2 (1,2),which I did by myself. And he should complete other parts steps according the calculation I uploaded to you.
*****Notice
*****Notice
I need the same steps in the labe3 sample the writer should follow included.
